DESCRIPTION

10.6" x 11.5" x 1.9"; 27.0 x 29.2 x 4.9 cm

Intel® Core™2 Duo (Merom) T7400 4MB L2 2.16 GHz 667 MHz (Option)

Intel® Celeron® M 430 1 MB L2 1.73 GHz 533 MHz (Option)

Intel® Core™2 Duo (Merom) T5500 2MB L2 1.66 GHz 667 MHz (Standard)

Intel 945GM

Integrated in Intel 945GM Chipset. Dynamic allocation from 64 MB up to 224 MB RAM

512 MB (Standard), 1 GB, or 2 GB DDR2 DRAM (Options)

Removable Hard Drive: 80 GB with three dimensional shock absorber and heater (Standard)

4 GB Flash Drive (Option, replaces Hard Drive)

Microsoft® Windows® XP Professional, SP2 (32 bit)

RGB. MW800 Series displays can be supported via the RGB interface

3x USB 2.0 in 12.1" displays (1 for keyboard, 2 general purpose)

Optional Bluetooth module based on Broadcom BM-GP-BR-51. Available only with 12.1" displays

1 External Type II, on front of CPU

Centronics type 26 pin connector. 4 Programable General Purpose I/Os can be set to input or output, and 5V or vehicle battery voltage. Ignition sense inputs, vehicle speed and direction inputs (latter two for use with Dead Reckoning GPS). Battery voltage output (1A) and 5V DC output (1A) for relay contact vetting voltage. Additional Motorola technician signals for internal wireless board programming.

Line out (non-amplified) for external speaker; external microphone in (non-amplified)

-22 to +158 degrees F (-30C to +70C). Some performance degradation may be experienced at temperatures below -4 degrees F (-20C) and above 122 degrees F (+50C)

-40 to +158 degrees F (-40C to +70C)

90 to 95% relative humidity at 50 degrees C after 8 hours

IP54

20g peak ½ sine wave @ 11ms, 30 impacts 90 to 95%

Per ITA/EIA 603 Paragraph 3.3.4 and MIL-STD-810F method 514.5, Fig. 514.5C-1

Per MIL-STD-810F method 506.4 Procedure III

5 hours in dust (140 mesh silica flour) laden atmosphere, dust agitation time is for 2 seconds every 15 minutes

8 hours, 5% Sodium Chloride at 35 degrees C, MIL-STD-810F method 509.4

Per UL94

7 cycles of 24 hours with no functional degradation per MIL-STD-810F, method 505.4, Procedure I

75g, 6 ms per MIL-STD-810F method 516.5, Procedure V